How do you connect your downrigger release/flasher?

A general fishing forum to discuss, chat, or ask questions about all things related to saltwater or freshwater fishing. Image

How do you connect your downrigger release/flasher?

Postby grizz80 » Mon Jan 29, 2018 10:39 am

I pretty much always clip my 5'- 6' release at the downrigger ball tail-end.
During this down-time I've been catching-up on some fishin articles and am curious about the following:
1) Compare using of the "Ace in the Hole" method, clipping a release directly to the ball or clipping a few feet or so up the cable with flasher attached to your main line:
1) Advantages or disadvantages for-
2) Do you see more take-down action with any method over another-
3) Concerns or comments about any method-
4) When one method is preferred over another- (obviously don't use the Ace in the Hole method when trolling not action hardware)
grizz80
Pollywog
 
Posts: 26
Joined: Sat Apr 23, 2016 6:58 am

Re: How do you connect your downrigger release/flasher?

Postby grizz80 » Tue Jan 30, 2018 6:24 am

Wow I see a number of views for this post but no responses, are the answers to this topic a big secret? ;)
grizz80
Pollywog
 
Posts: 26
Joined: Sat Apr 23, 2016 6:58 am

Re: How do you connect your downrigger release/flasher?

Postby HarperMA10 » Tue Jan 30, 2018 7:34 am

I am in the same boat, I am doing all my "catching up" right now anxiously waiting for more time in the boat. For what it's worth, I am by no means an expert...I have only used the conventional method (or what I believe is the go-to for most guys) that is when I run my clip 5ft behind the trailing end of the ball. Where my flasher and hootchie/spoon/bait do their dance.

note- I used to use the scotty rubber snubber to hang my ball and run release above the ball...but my ball hit bottom and broke my snubber, so due to the fact I didn't have another snubbber I have been running my replacement ball off the cable.

I had to go and investigate the "ace in the hole" technique to see what you're talking about...I can't provide any valuable input.
User avatar
HarperMA10
Pollywog
 
Posts: 3
Joined: Fri Jan 05, 2018 3:09 pm
Location: Harper, WA

Re: How do you connect your downrigger release/flasher?

Postby grizz80 » Tue Jan 30, 2018 8:12 am

Harper,
Thanks for the post, I don't use a rubber snubber but do use a looped tuna cord instead. I find it same as the rubber snubber something to grab vice the cable or braid. I've read too many horror stories about the rubber snubbers failing for some reason or another, you'll even find stories of those who attach a brand new snubber and drop their ball into the water and the snubber fails and there went the gear.
thank again!
grizz80
Pollywog
 
Posts: 26
Joined: Sat Apr 23, 2016 6:58 am

Re: How do you connect your downrigger release/flasher?

Postby Bowfinger12000 » Wed Jan 31, 2018 6:00 am

Well I to am not your perverbial expert but this last year I was turned onto running a rudder flasher on my setup and for me personally I love it. I haven't tried the snubber setup yet and still may but I'll definitely consider the tuna cord rig after reading those comments.
Bowfinger12000
Pollywog
 
Posts: 34
Joined: Wed Feb 15, 2017 2:22 pm

Re: How do you connect your downrigger release/flasher?

Postby Nelly » Wed Jan 31, 2018 6:53 am

Sorry guys,
I've just been slammed busy at the Seattle Boat Show but let me give you a pic instead of a thousand words:

Here's a slide from my popular Dirty Downrigger Tricks PowerPoint showing how I rig a rudder
Rudder.png
Rudder.png (115.23 KiB) Viewed 367 times


Let me know if that answers your questions! cheers
The Outdoor Line on 710 ESPN Seattle 6-9am Every Saturday!
User avatar
Nelly
Spawned Out Boot
 
Posts: 2248
Joined: Tue Dec 28, 2010 9:04 am

Re: How do you connect your downrigger release/flasher?

Postby grizz80 » Wed Jan 31, 2018 7:05 am

"Thank you" Bowfinger and Nelly for the input !!!
grizz80
Pollywog
 
Posts: 26
Joined: Sat Apr 23, 2016 6:58 am


Return to General Fishing Forum & Discussion

Who is online

Users browsing this forum: No registered users and 1 guest